Teams Aluminium 3-piece rear spindles for YD-2 - YOKOMO

Y2-415ART - Teams Aluminum 3-piece rear spindles for YD-2 - YOKOMO

This is an aluminum rear hub carrier that can be used in common with the YD-2 series. Using a universal shaft with a short axle pin for tight friction, placing the position of the universal joint pin as far outwards as possible and bringing it closer to the pin on the outer suspension arm activates suspension movement, allowing more direct motion. The classic universal joint shaft can also be used by adding a spacer, etc.., so you can feel the difference in movement depending on the combination.
Another feature of this rear hub carrier assembly is that you can choose the mounting position of the upper/lower arm, and by making the upper side a separate part, you can variably modify the length of the upper arm and control the change in contact surface when driving, it's easy to use, and an effective grip point, especially on road surfaces such as P slabs. The mounting height of the lower control arm can be selected from 4 positions, so that the width of roll center adjustment is considerably enlarged, and it's an excellent match for weight adjustment around the rear.

* If you use the lower control arm mounting hole, the control arm and the inside of the wheel may interfere, depending on the type of wheel.
All mounting positions are available for Racing Performer RP-6313 series wheels.