Stops Fusée rwd 3.0 mm - Rêve D

RD-003-30 - Stoppers rwd 3.0 mm - REVE D

Adjust steering angle without interrupting suspension movement!

Aluminum plug3.0mm / Φ3.5mm for RD-001 ASL Front Knuckle is now available!

RWD derivative cars generally use a stub axle stop (steering stop) to set the maximum steering angle, but to maximize the steering angle, many people use M3 set screws.

Even with the M3 set screw, the function of the stop works, but the surface of the screw will impede suspension movement at maximum steering angle.

That's where it comes in!

Unlike the M3 adjusting screw, the surface has no irregularities, so it doesn't impede suspension movement even at maximum steering angle.

What's more, because it's made of lightweight aluminum, it's also effective at reducing weight by replacing it with an iron adjusting screw.

The range comprises a part with diameters of Φ3.0 mm and Φ3.5 mm.

In addition to .0mm3.0 mm which achieves the maximum steering angle, Φ3.5 mm which is an option when you wish to control the steering angle slightly is prepared.

Φ3.5 mm is effective when the commercially available Φ4.0 mm has insufficient steering angle and Φ3.0 mm has too much angle!

If you are currently using an M3 set screw as a stop, or would like to increase the steering angle by more than a .0mm4.0 mm stop, please try it out.

◆ RD-003-30: aluminum stub axle stop for RD-001 ASL front stub axle (Φ3.0mm, 2 pcs.) ￥ 520 (excl. tax)

◆ RD-003-35: aluminum stop for RD-001 ASL front spindle (Φ3.5 mm, 2 pcs.) ￥ 520 (excl. tax)

◆ Screws: M3, length 4.5 mm

◆ Pedestal diameter: 5.5 mm

◆ Length from base to tip: 16 mm

◆ Dimensions of hexagonal holes: 1.5 mm on flats

* The above dimensions are suitable for the RD-001 ASL front rocket carrier.

* If using for other joints, please check joint, wheel dimensions before purchasing.

2 pieces